Update to NEM load table (Unmetered Loads) – current proposals
In this section
In this section
- Update to NEM load table (Unmetered Loads) – current proposals
- Update to NEM load table (unmetered loads) - previous proposals
Proposal to Update NEM Load Table (Unmetered Loads)
Following the migration from the Jurisdictional Metrology Procedures to the NEM Metrology Procedure, the obligation to update and publish the Load Tables for Type 7 Metering Installations (NEM Load Table) lies with AEMO.
The NEM Load Table sets out the power consumption values for each unmetered device type. These power consumption values are used in the algorithm that calculates metering data for unmetered loads in the NEM.
As per clause 12.1.4(d) of the NEM Metrology Procedure Part B AEMO is required to:
- Consider and publish proposals to add an unmetered device type to the NEM Load Table.
- Take into account the views of interested parties to determine whether to add an unmetered device type to the NEM Load Table.
The following process will be used to amend the NEM Load Table:
Publish the supporting documentation for the proposed new unmetered device load value on the AEMO website for comment and agreement by industry.
Period for comments on the proposed unmetered device load value will be 20 business days.
In the absence of any comments that dispute these proposals, AEMO will take the proposed load for the unmetered device type as agreed.
The new unmetered device load value agreed and published in the NEM Load Table may only be used exactly as tested.
The new unmetered device load value agreed and published can be used in all NEM jurisdictions that have declared street lights as market loads.
AEMO invites comment as to the acceptance of this new unmetered device load value into the NEM Load Table as per clause 12.1.4(d) of the NEM Metrology Procedure Part B.
Gerard Lighting Sylvania SasteLED Maximus and Sekurit Luminaires
Gerard Lighting has applied to have its Sylvania SastaLED Maximus and Sekurit luminaires added to the NEM Load Table as unmetered devices and has proposed the following amendment to the NEM Load Table:
Jurisdiction Submitted by Unmetered Device Load as Tested (W) ALL Gerard Lighting Sylvania SasteLED Maximus 110W and Sekurit 110W 114 W ALL Gerard Lighting Sylvania SastaLED Maximus 150W and Sekurit 150w 150.3W ALL Gerard Lighting Sylvania SastaLED Maximus 175W and Sekurit 177.2W
AEMO has considered the Gerard Lighting proposal against the minimum requirements to add new unmetered device types to the NEM Load Table (as set out in clause 12.1.4(d) of the Metrology Procedure Part: B) and concludes that this proposal fulfils these minimum requirements.
The Gerard Lighting proposal, including supporting test results, technical summary and letter from Endeavour Energy supporting the installation of this device are published on this web page.
Please direct all comments to David Ripper, Principal Metrology Engineer, NEM.UML@aemo.com.au.
Date of publication: 21 February 2019. Reponses to be submitted by no later than 25 March 2019.
- Application Letter (156 KB, pdf)
- Support Letter (47 KB, pdf)
- Test Reports (6.0 KB, pdf)
- Data Sheets (3.6 KB, pdf)